Frequently asked questions

  • What is the cost to weld a cracked spinner?

    • Prices start at​ $200 plus shipping but will go up slightly if the crack is over 2" or if there is a doubler inside the spinner.

  • ​What is the maximum length of crack that can be repaired?

    • We are FAA approved to repair a total length of cracks to be 8" or less or 50% of the part.​

  • ​Will the repair come back with a yellow tag?

    • All repairs are returned with a maintenance release and a yellow tag. 8130's are issued upon request.​

  • ​How quickly will I get my part back?

    • We normally complete all repairs with in 3-4 days.​

  • ​Do you provide an AOG service?

    • We provide an AOG service for an additional $100 fee. Most parts ship with in 24 hours.​

  • ​Can you repair any spinner?

    • We are certified in all makes and models.​

  • ​Can you repair a chrome plated spinner?

    • Yes. We remove the chrome in the heat affected zone and only polish the repaired area but we do not re-chrome.​

  • ​Can you removed a dent from my spinner?

    • Yes, most dents can be removed. We do not issue a maintenance release for removing a dent.​

  • Do I need to fill out a form to send my spinner in for repair?

    • No. We request a contact phone number and a return shipping address.​ We will contact you when your part is repaired and ready to ship.

Back Plates

  • ​What is the cost to repair my back plate?

    • Prices begin at $200 plus shipping. If disassembly is required the price increases substantially. Please call for a quote.​

  • ​What is the maximum length of crack that can be repaired?

    • We are FAA approved to repair a total length of cracks to be 8" or less or 50% of the part.​

  • ​Does the repaired come back with a yellow tag?

    • All repairs are returned with a maintenance release and a yellow tag. 8130's are issued upon request.​

  • ​How quickly will I get my part back?

    • We normally​ complete all repairs with in 3-4 days.

  • ​Do you provide an AOG service?

    • We provide an AOG service for an additional $100 fee. Most parts ship with in 24 hours.​​

  • ​Can you repair any back plate? 

    • We are certified in all makes and models.​

  • ​Can you weld any forward bulkhead?

    • No as some forward bulkheads are manufactured from a non-weldable material. Please call for details.​

  • Do I need to fill out a form to send my part in for repair?

    • No. We request a contact phone number and a return shipping address.​ We will contact you when your part is repaired and ready to ship.​

Location

Our office is located at 

2083 Co. Rd. L., Hanger 15

East Troy WI. 53120

 

  Open 5 days a week:
      Monday-Friday  8am-5:30pm
                All parts made in

 

Call or email us at:

(262) 642-5003 or

(414) 333-6833 (Cell)

kweckerly@wi.rr.com

Fax: (262) 642-5043